Project Type: LED Hydrogen Mask
Power: DC 12V, 4A
Load: 300ml Size: 49.2 x 45.5 x 44.8cm / 19.4 x 18.0 x 17.6inch
Net weight: 3.6KG
1. Assemble the instrument.
2. Connect the power supply.
3. When the power connection indicator (middle) indicator is on, it indicates that it is in the standby state.
4. Unscrew the top small cover counterclockwise (large cover for cleaning).
5. Add water (300ml when topping up) and turn the lid clockwise.
6. Parameter adjustment, adjust the level according to the horizontal button (1. Can be divided into 3 levels of adjustment. 0.2. Default mode: medium (middle) 3. Horizontal adjustment can also be performed during operation
.8. Place the instrument in the middle position above the face and the operation begins.
9. Press the Start/Stop button to start the operation (automatically close after 10 minutes.)
It is recommended to turn on the machine and wait 1-2 minutes before using it for the first operation. This is the process of waiting for the filter to saturate.
1 x host
1 x mask
1 x accessory kit
Make sure this fits by entering your model number.
1. High concentration hydrogen water: This machine can convert mineral water into hydrogen water..
2. Ultrasonic Fine Spray: Using a 110 KHz ultrasonic wave, a nano unit spray is produced, also known as a “spray.”.
3. Make sure there is no dead angle 270° spray to allow you to enjoy the spa from any angle..
4. The general pore size is 25 nm and the size of the water molecule is 0.4 nm. Therefore, the absorption speed is very fast..
5. Easy to operate, suitable for professional use or home use.